Differences between revisions 6 and 7
⇤ ← Revision 6 as of 2016-06-20 10:22:51 →
Size: 7274
Editor: kailash
Comment:
← Revision 7 as of 2016-06-20 10:23:39 → ⇥
Size: 7316
Editor: kailash
Comment:
Deletions are marked like this. Additions are marked like this.
Line 85: Line 85:
 1. Set the objective to minimisation of all fluxes. Since minimisation is the default direction, all you need to do is to use the {{{lp.SetObjective()}}} method with all reactions in the LP object as argument, which can be obtained as {{{lp.cnames.values()}}}  1.
 Set the objective to minimisation of all fluxes. Since minimisation is the default direction, all you need to do is to use the {{{lp.SetObjective()}}} method with all reactions in the LP object as argument, which can be obtained as {{{lp.cnames.values()}}}
Line 87: Line 88:
 1. Use the dictionary of biomass fluxes as fixed constraints ({{{lp.SetFixedFlux(...)}}}).(like in exercise from Part A)
1.
 Use the dictionary of biomass fluxes as fixed constraints ({{{lp.SetFixedFlux(...)}}}).(like in exercise from Part A)
Line 91: Line 95:
 1. You will scan the photon uptake reaction by fixing its flux to a set of value in a linear range, specifically 50 points evenly distributed from 0 to 1. To do this, first generate a list of these values (Use the knowledge from exercise of the [[http://mudshark.brookes.ac.uk/AccliPhot/WorkshopOne/prac1|python practical]]).  1.
 You will scan the photon uptake reaction by fixing its flux to a set of value in a linear range, specifically 50 points evenly distributed from 0 to 1. To do this, first generate a list of these values (Use the knowledge from exercise of the [[http://mudshark.brookes.ac.uk/AccliPhot/WorkshopOne/prac1|python practical]]).
Line 93: Line 98:
 1. Define a dictionary (this will be referred to as {{{sol}}} henceforth) where you will collect the LP solutions.
Line 95: Line 99:
 1. Write a {{{for}}} loop over the list of values generated above. Inside the loop, set the constrain on the photon uptake reaction ({{{Photon_tx}}}) equal to the loop variable, solve the LP, and collect the solution in {{{sol}}} created above (you can use the loop variable as key)  1.
 Define a dictionary (this will be referred to as {{{sol}}} henceforth) where you will collect the LP solutions.
Line 97: Line 102:
 1. You will now analyse the LP data. In order to collect the names of all reactions that appear in any of the solutions, create an empty dictionary and run a {{{for}}} loop to update it with the reaction names from the solutions generated previously, e.g.:.... box with python code here
Line 99: Line 103:
 1. Import the module {{{DataSets}}} from {{{Data}}}. Create an instance of the {{{DataSet}}} class, give the keys of the reaction name dictionary just created to the argument with keyword {{{ItemNames}}}, as such: :.... box with python code here  1.
 Write a {{{for}}} loop over the list of values generated above. Inside the loop, set the constrain on the photon uptake reaction ({{{Photon_tx}}}) equal to the loop variable, solve the LP, and collect the solution in {{{sol}}} created above (you can use the loop variable as key)
Line 101: Line 106:
 1. The names provided will be column names in data set created. The {{{DataSet}}} class is a subclass of the {{{ScrumPy}}} {{{matrix}}} class, as are the stoichiometry matrices that you have looked at before, so much of the structure and properties of data sets will be similar.
Line 103: Line 107:
 1. Update the data set with the LP solutions so that each row corresponds to a fixed photon flux. Conveniently, there is a {{{DataSet}}} method, called {{{UpdateFromDic(...)}}}, that updates the data set with a dictionary if the keys can be found in the column names of the data set and the values are numbers. Write a {{{for}}} loop over the {{{collection}}} dictionary and update the data set with each solution.  1.
 You will now analyse the LP data. In order to collect the names of all reactions that appear in any of the solutions, create an empty dictionary and run a {{{for}}} loop to update it with the reaction names from the solutions generated previously, e.g.:.... box with python code here
Line 105: Line 110:
 1. Since we are interested in reactions that change flux as a response to changes in photon flux, we need to identify these reaction in the data set. We will do this by looking at the aboslute difference between the smallest and largest flux through each reaction in the set. Use a {{{for}}} loop over the column names of the data set (if the data set is named as{{{ ds}}} this is {{{ds.cnames}}}). For each column name get the associated list of values (use the method {{{ds.GetCol(c)}}} with {{{c}}} being the name of column, i.e. if you are in a loop, the loop variable); calculate absolute of the difference between the maximum and minimum flux value in the list (we can use the built-in functions {{{abs()}}}, {{{max()}}}, and {{{min()}}} for this), if this difference is above a fixed threshold the reaction (i.e. the loop variable) will be stored. Here is the code: .:.... box with python code here
Line 107: Line 111:
 1. Use the plotting methods of {{{DataSet}}} to look at the flux responses of the changing reactions. Set the x-axis as the photon flux with the method {{{ds.SetPlotX(...)}}}, where the argument is a column name in the data set {{{ds}}}, here the photon transporter ({{{Photon_tx}}}) (note that {{{ds}}}{{{.SetPlotX(...)}}} only initialises the plot internally, you will not see the plot until data is added). Add columns to the plot using the method {{{ds}}}{{{.AddToPlot(...)}}}, where the argument is either a string (name of a column), or a list (of column names). Similarly, you can remove column from the plot using the methods {{{ds.RemoveFromPlot(...)}}} and {{{ds.RemoveAllFromPlot()}}}. You can check all the functions of the dataset {{{dir(ds)}}}.  1.
 Import the module {{{DataSets}}} from {{{Data}}}. Create an instance of the {{{DataSet}}} class, give the keys of the reaction name dictionary just created to the argument with keyword {{{ItemNames}}}, as such: :.... box with python code here


 1.
 The names provided will be column names in data set created. The {{{DataSet}}} class is a subclass of the {{{ScrumPy}}} {{{matrix}}} class, as are the stoichiometry matrices that you have looked at before, so much of the structure and properties of data sets will be similar.


 1.
 Update the data set with the LP solutions so that each row corresponds to a fixed photon flux. Conveniently, there is a {{{DataSet}}} method, called {{{UpdateFromDic(...)}}}, that updates the data set with a dictionary if the keys can be found in the column names of the data set and the values are numbers. Write a {{{for}}} loop over the {{{collection}}} dictionary and update the data set with each solution.


 1.
 Since we are interested in reactions that change flux as a response to changes in photon flux, we need to identify these reaction in the data set. We will do this by looking at the aboslute difference between the smallest and largest flux through each reaction in the set. Use a {{{for}}} loop over the column names of the data set (if the data set is named as{{{ ds}}} this is {{{ds.cnames}}}). For each column name get the associated list of values (use the method {{{ds.GetCol(c)}}} with {{{c}}} being the name of column, i.e. if you are in a loop, the loop variable); calculate absolute of the difference between the maximum and minimum flux value in the list (we can use the built-in functions {{{abs()}}}, {{{max()}}}, and {{{min()}}} for this), if this difference is above a fixed threshold the reaction (i.e. the loop variable) will be stored. Here is the code: .:.... box with python code here


 1.
 Use the plotting methods of {{{DataSet}}} to look at the flux responses of the changing reactions. Set the x-axis as the photon flux with the method {{{ds.SetPlotX(...)}}}, where the argument is a column name in the data set {{{ds}}}, here the photon transporter ({{{Photon_tx}}}) (note that {{{ds}}}{{{.SetPlotX(...)}}} only initialises the plot internally, you will not see the plot until data is added). Add columns to the plot using the method {{{ds}}}{{{.AddToPlot(...)}}}, where the argument is either a string (name of a column), or a list (of column names). Similarly, you can remove column from the plot using the methods {{{ds.RemoveFromPlot(...)}}} and {{{ds.RemoveAllFromPlot()}}}. You can check all the functions of the dataset {{{dir(ds)}}}.

Practical 8

Analysing a genome scale metabolic model of A. thaliana

In this practical we (you !) will be replicating some the analysis that was discussed in the previous lecture. In order to do this you will need to download the files associated with the model:

  1. Download the file AraGSM.tgz into the area in which you have been using for your other practicals.
  2. This is a compressed archive file and you will need to extract the files before they can be used:

    •  $ tar -zxf AraGSM.tgz 

  3. This will generate a directory, A.thaliana, containing two sub-directories: Model and Analysis. Model contains the model definition files and an additional python module (in Model/Tools). Analysis contains the python modules you will need for this practical.
  4. For the sake of the practical we have made a few simplifications and the model and results will not be identical to those in the lecture. the aim of the practical is to illustrate the techniques used.

Part A:

Investigating the effect of knocking our the Calvin cycle enzymes from GSM of A. thaliana

  1. cd into Analysis/Knockouts

  2. Start ScrumPy and the load the model as before.

  3. Import the KnockOut module.

  4. This defines a single function also called KnockOutEffects that returns a dictionary recording the impact of remove each reaction from the model (relative change in objective value)

  5. lp = BuildLP.BiomassLP(m)
  6. lp.Solve()

    • wild_type_solution = lp.GetPrimSol()

    • Observe the flux values of the Calvin Cycle enzymes

  7. Load the KnockOutEffects from the KnockOut module and provide the reaction to knockout in the argument

  8. Investigate the differences in wild_type_solution and mutant_solution and interpret the results.
  9. from Util import Set
  10. new_active_reactions = Set.Complement(mutant_solution, wild_type_solution)
  11. Similarly , find the reactions that were inactive as a effect of knock out.
  12. Identify the reactions that have change in the flux values and interpret the results.

  13. Repeat Step 5-9 for the FBPase, phosphoribulokinase, G3Pdh and SBPase, FBPase dual knock out mutant.

Part B : Analysing the response to varying input of photon flux

  1. Change directory to the relevant area:

    • $ cd A.thaliana/Analysis/LightScan

  2. Start ScrumPy and load the model:

    •  >>> m = ScrumPy.Model("../../Model/AraTopLevel.spy") 

    • (If you wish to avoid a bit of typing, leave the model name blank and use the file selector to find the model file instead.)
  3. Examine the files that are now presented - how much can you recognise from previous work in this course.
  4. Create an LP object with the rice GSM as argument (see previous LP exercise for details on how to do this).

  5. Set the objective to minimisation of all fluxes. Since minimisation is the default direction, all you need to do is to use the lp.SetObjective() method with all reactions in the LP object as argument, which can be obtained as lp.cnames.values()

  6. Use the dictionary of biomass fluxes as fixed constraints (lp.SetFixedFlux(...)).(like in exercise from Part A)

  7. Try to solve the LP and make sure the number of reactions in the solution is non-zero

  8. You will scan the photon uptake reaction by fixing its flux to a set of value in a linear range, specifically 50 points evenly distributed from 0 to 1. To do this, first generate a list of these values (Use the knowledge from exercise of the python practical).

  9. Define a dictionary (this will be referred to as sol henceforth) where you will collect the LP solutions.

  10. Write a for loop over the list of values generated above. Inside the loop, set the constrain on the photon uptake reaction (Photon_tx) equal to the loop variable, solve the LP, and collect the solution in sol created above (you can use the loop variable as key)

  11. You will now analyse the LP data. In order to collect the names of all reactions that appear in any of the solutions, create an empty dictionary and run a for loop to update it with the reaction names from the solutions generated previously, e.g.:.... box with python code here

  12. Import the module DataSets from Data. Create an instance of the DataSet class, give the keys of the reaction name dictionary just created to the argument with keyword ItemNames, as such: :.... box with python code here

  13. The names provided will be column names in data set created. The DataSet class is a subclass of the ScrumPy matrix class, as are the stoichiometry matrices that you have looked at before, so much of the structure and properties of data sets will be similar.

  14. Update the data set with the LP solutions so that each row corresponds to a fixed photon flux. Conveniently, there is a DataSet method, called UpdateFromDic(...), that updates the data set with a dictionary if the keys can be found in the column names of the data set and the values are numbers. Write a for loop over the collection dictionary and update the data set with each solution.

  15. Since we are interested in reactions that change flux as a response to changes in photon flux, we need to identify these reaction in the data set. We will do this by looking at the aboslute difference between the smallest and largest flux through each reaction in the set. Use a for loop over the column names of the data set (if the data set is named as ds this is ds.cnames). For each column name get the associated list of values (use the method ds.GetCol(c) with c being the name of column, i.e. if you are in a loop, the loop variable); calculate absolute of the difference between the maximum and minimum flux value in the list (we can use the built-in functions abs(), max(), and min() for this), if this difference is above a fixed threshold the reaction (i.e. the loop variable) will be stored. Here is the code: .:.... box with python code here

  16. Use the plotting methods of DataSet to look at the flux responses of the changing reactions. Set the x-axis as the photon flux with the method ds.SetPlotX(...), where the argument is a column name in the data set ds, here the photon transporter (Photon_tx) (note that ds.SetPlotX(...) only initialises the plot internally, you will not see the plot until data is added). Add columns to the plot using the method ds.AddToPlot(...), where the argument is either a string (name of a column), or a list (of column names). Similarly, you can remove column from the plot using the methods ds.RemoveFromPlot(...) and ds.RemoveAllFromPlot(). You can check all the functions of the dataset dir(ds).

None: Meetings/Nepal2016/P4 (last edited 2016-06-30 09:58:48 by mark)